Tetra Pak® High Shear Mixer for emulsified sauces and spreads

Stessa qualità, costo inferiore

  • Bassi costi di produzione, resi possibili da un processo altamente efficiente e una resa ottimale degli ingredienti
  • Controllo completo sui parametri di qualità, grazie a un unico processo di emulsificazione in due fasi e a uno strumento di previsione
  • Flessibilità illimitata per produrre qualsiasi prodotto, dalle salse emulsionate alle creme spalmabili a base di fagioli e verdure. Facile da estendere.

High Shear Mixer dedicato a creme spalmabili a base di fagioli e verdure

La gamma di Tetra Pak® High Shear Mixer B200-500VAA, B300-1500VAA e B400-2500VAA per creme spalmabili a base di fagioli e verdure è la migliore soluzione per miscelare prodotti in questa categoria.

Ti consente di produrre un mix di qualsiasi qualità desiderata, sia che debba essere grossolana, liscia o se è necessario mescolare particelle come pezzi di verdure o erbe. Le caratteristiche sono appositamente progettate per gestire i ceci, i fagioli e altre verdure in modo efficiente e semplice. 

Tetra Pak High Shear Mixer per fagioli e creme spalmabili

Molto più di un miscelatore

La maggior parte dei miscelatori per fare hummus sono semplicemente miscelatori. Tuttavia, la nuova opzione di miscelazione di Tetra Pak progettata per i produttori di hummus è molto di più.

Hummus, falafel, pane e olive

Gusta il successo con l'hummus

Stai pensando di entrare in questo mercato in forte espansione o di espandere la tua produzione esistente? Abbiamo le attrezzature e le competenze di cui hai bisogno.

Caratteristiche

Prediction tool

Ensure identical or enhanced product quality

Our prediction tool enables the replication and/or enhancement of any cold emulsion products. With an existing recipe as the starting point, it measures the size and distribution of droplets and generates the exact process parameters required to replicate it i.e. mixing time, speed and shear force. Just bring your sample to our Product Development Centre and we’ll tell (and/or show) you how to make it on our high shear mixer.

Dynamic HS mixing head

Full control over product quality parameters

Our patented technology allows high and low shear mixing in the same process. It gives you complete control over the speed, time and degree of shear force of your mixing. This means you can fine-tune the size and distribution of droplets in your product, and hence achieve the exact viscosity, mouthfeel and texture you want.

Double-shaft agitator

Ensures a homogenous end product

In this unit, a double-shaft agitator circulates product around the tank. Its counter rotating blades reach every corner of the tank, ensuring that all product passes evenly through the Dynamic HS mixing head, resulting in a homogenous end product regardless of viscosity.

Unique mixer design

Ingredient introduction 4 – 5 times faster than standard equipment

In this high shear mixer, the ingredients are introduced into the main body of the mixing vessel, rather than being fed directly into the high shear mixing head. This means there is no risk of over-shearing and the speed of ingredient introduction can be significantly higher than traditional mayonnaise production equipment.
Vacuum system

For rapid ingredient introduction and product deaeration

Ingredients are rapidly drawn into the mixing vessel by an independently controlled vacuum pump. This enables faster, more complete deaeration of the product and allows full control of the vacuum level inside the mixer.

Opzioni

Multi-stage mixing head

In a batch plus set-up, a patented rotor stator inline mixing head is placed on the outlet string of the mixer – for creating the final emulsion. It combines the emulsification process with emptying, thereby shortening production time. Its mechanical design is hydro-dynamically balanced to allow very high speeds and narrow tolerances.

Twin-screw pump

In a batch plus set-up, this pump controls the flow of product from the mixing vessel into an inline multi-stage HS mixing head – creating the final emulsion. It can handle both low and high viscosity products, and works under extremely low suction pressures without risk for cavitation.

Control of ingredient inlet and product outlet

To produce mayonnaise continuously with a batch plus setup, it is possible to add control valves and flowmeters on all ingredient inlets and the product outlet. This increases capacity and further reduces the production cost per kilo of product.

Bin lifter

For easy lifting and loading

The bin lifter system is capable of lifting bins of 200 litres or 300 litres with the press of a button. The contents of the bin can be emptied automatically into the mixing tank through a large manway at the top. This provides a sanitary and ergonomic way to add ingredients such as beans, chickpeas and other vegetables.

Pressure Vessel

Pressure cooking at up to 135°C

By choosing a pressure vessel for the mixing tank, customers have the option of cooking under pressure at 3 bars giving temperatures of up to 135°C. Apart from giving an even shorter cooking time, this form of cooking can give other benefits such as preserving colour and taste.

Direct Steam Injection

Direct steam injection

If you want to heat up the contents of the mixer fast, there is the option of direct steam injection. We have developed our own design of nozzles to ensure a long working life. A sanitary steam system is used to ensure food safety.

Vibrating powder hopper

Reduces air incorporation; enhances product quality
In a batch or batch plus set-up where powdered ingredients are used, our patented vibrating powder hopper compresses the powder, preventing the formation of so-called ‘rat holes’. This significantly reduces the amount of air introduced along with the powder.

Vuoi saperne di più su Tetra Pak® High Shear Mixer?